-
Flashback Express Screen Capture Software Overview
[vc_row][vc_column][vc_column_text] Not a week goes by that someone doesn’t ask me about the software I use to capture my screen for the tutorial videos I do. I use a program called Flashback Express by Blueberry Software – link below. There is a Pro version available at a decent price, but so far, I haven’t needed anything in the Pro version, so I continue to use the free version. As usual, if you have any questions, comments, or concerns, please feel free to comment! If you don’t wish to make a public comment, click this Contact Us link, and submit it to me privately. I read ALL of the messages I…
-
Vectric Software for the Absolute Beginner – Part 16
[vc_row][vc_column][vc_column_text] Polylines and Smart Snapping This article accompanies the sixteenth video in a series on my YouTube channel. If you’re not subscribed to my channel, here’s a link. Come on by and check it out. Hopefully you’ll find something you like. In this 16th video of the series, I’ll take a bit of a step back. A sharp-eyed viewer informed me that I had never covered drawing straight lines or polylines within the Vectric software in any of my videos. Well, after looking them over, I have to admit he was right. So in this video, I’ll do exactly that – and more. It’s impossible to discuss lines and polylines…
-
5K Giveaway My Way
Scroll Down for the Official Entry Rules Over the course of the last week, my humble little channel hit the 5000 subscriber milestone! I want to take this opportunity to say thank you to each and every one of you who have subscribed to my YouTube channel. As a way of saying thank you to my subscribers, I’m announcing the 5K Giveaway Done My Way! The rules are simple. To enter, you must be subscribed to my channel. You must live in the United States. You must leave a comment in the comment section of this video. That’s it! Entries will close at 11:59pm, Sunday, February 17th, 2019. Limit of…
-
Vectric Software for the Absolute Beginner – Part 15
[vc_row][vc_column][vc_column_text] Part 15 – Basic Bitmap Tracing and Node Editing [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]This article accompanies the fifteenth video in a series on my YouTube channel. If you’re not subscribed to my channel, here’s a link. Come on by and check it out. Hopefully you’ll find something you like. In this 15th video of the series, I’ll get a bit deeper into Bitmap Tracing within the Vectric software. We’ll import a rather simple color image into VCarve, and I’ll show you how to adjust the number of colors we want to trace in the bitmap. Then we’ll go in and do a little bit of image cleanup using the Node Editing mode. I’ll…
