![Part 7 Thumb](https://marklindsaycnc.com/wp-content/uploads/2019/02/Part-7-Thumb.jpg)
Vectric Software for the Absolute Beginner Part – 7
Part 7 – Offsetting and Increment & Save
WHAT’S IT ABOUT?
This article accompanies the seventh video in a series on my YouTube channel. If you’re not subscribed to my channel, here’s a link. Come on by and check it out. Hopefully you’ll find something you like.
While this series might seem like going back to the basics to the seasoned veteran, people who are new to CNC in general, and CAD/CAM software in specific, are joining Facebook groups and message forums every day. I frequent a lot of those forums, administrate a few Facebook groups, and am a member of several others. As a result, I’m seeing a lot of posts from beginners who have never done anything in CAD/CAM software, asking questions on some of the very basic tasks involved in using CAD/CAM software.
WHAT’S NEW?
In this seventh video of the series, we’ll revisit the clock face file we created in Part 3 of this series, and I’ll demonstrate Offsetting a vector object. Then I’ll introduce you to a new feature in Aspire, Cut2D, and VCarve software – Increment and Save.
FOR THE VETERANS
For the seasoned veteran; I would ask that you please remember that none of us were born with this info. We didn’t just magically start knowing this stuff. Every one of us had to learn it. So if something seems like it should be common sense to you, remember that the person who taught you thought the same thing. No, you probably don’t need a lot of the info contained in this video, or even in this series. But if you decide to check it out, hopefully you’ll pick up a tip or pointer here or there, or at least get some insight into what the absolute beginner wants to learn. Maybe you could start sharing your expertise with others as well. This hobby can never have too many teachers.
FOR THE BEGINNER
For the absolute CNC beginner; don’t stress over any of this. It’s supposed to be fun, remember? You CAN learn this. You CAN do this. It’s not always super easy, but it’s never really super difficult, either. Just like anything else you want to do, there is no replacement for experience – and the only way to get that experience is to practice. Get into your CAD/CAM software, and learn it. Draw in it. Calculate toolpaths. Generate g-code. You don’t’ have to cut anything with it – it’s more important that you learn how to use the software than it is to start making chips.
That’s enough jabbering from me. Below is a link to the seventh video in the series that’s geared toward the absolute Vectric software beginner.
I use VCarve Pro version 9.015 in this video, but all of the information in the video applies to Cut 2D, VCarve, and Aspire software – both the Desktop and the Pro versions.
As usual, if you have any questions, comments, or concerns, please feel free to comment! If you don’t wish to make a public comment, click this Contact Us link, and submit it to me privately. I read ALL of the messages I get through my website, and I answer as many as humanly possible – unless you’re a spambot. Spambots get blocked – so there.
Remember, beginners – relax, take your time, and enjoy the process. It’s supposed to be fun, remember? You can do this. I’m living proof.
GET ON WITH IT!
the fine print
This is not an endorsement, paid or otherwise, of VCarve Pro, Vectric Ltd, or any other software or company. It’s just a demonstration of how I work. For more information on, or to download a free trial of VCarve Pro, visit the Vectric website at:
Remember to click that link up at the top of the page to check out my T-Shirt shop!
Until next time, take care and have fun!
![Part 8 Website Thumb](https://marklindsaycnc.com/wp-content/uploads/2018/10/Part-8-Website-Thumb.jpg)
![Part 6 Thumb](https://marklindsaycnc.com/wp-content/uploads/2018/08/Part-6-Thumb.jpg)