Listed below are all of the videos in my Vectric for the Absolute Beginner video series, in order.

Click a video pane to watch the video. Then you may continue to watch it here on my website, or click the YouTube logo in the bottom, right of the video pane to watch it on a YouTube video page.

Comments may only be seen or made on the YouTube video page.

Part 3 – Vectors, Circular Array, and Pocket Toolpath

Part 4 – Separate Last Pass, Tabs, and G-Code

Part 5 – Importing DXF Files

Part 6 – Resizing and Copying Objects

Part 7 – Offsetting Objects and Incremental Save

Part 8 – Climb Cut VS Conventional Cut

Part 9 – The Tool Database

Part 10 – Tool Database Merge and Backup

Part 11 – Join Vectors Using Layers

Part 12 – Enter and Use A Keyhole Bit

Part 13 – Text Tips & Tricks

Part 14 – Basic Bitmap Trace and Node Editing

Part 15 – More Basic Bitmap Tracing and Node Editing

Part 16 – Polylines and Smart Snapping

Part 17 – Mirroring Vectors

Part 18 – Intro to 3D Carving

Part 19 – Combine 3D Models

Part 20 – Importing STL Files

Part 21 – 3D Carving Workflow With Tool Change

Part 22 – Importing CRV Files from Outside Sources

Part 23 – Closing Open Vectors

Part 24 – Join and Group Vectors

Part 25 – Node Editing Text

Part 26 – Add and Preview Fonts

Part 27 – Reducing 3D Machining Times

Part 28 – Vector Selection Order

Part 29 – More Vector Joining Tools

Part 30 – Two-Sided Machining – Part 1

Part 31 – Two-Sided Machining – Part 2

Part 32 – Intro to the Moulding Toolpath

Part 33 – Introducing The Zero Plane

Part 34 – Tapered Ballnose Bits

Part 35 – Intro to the Texturing Toolpath

Part 36 – 2D vs 2.5D vs 3D Carving

Part 37 – Add a Form Tool to the Tool Database

Part 38 – Using The Distort Tool

Part 39 – The Distort Tool Bounding Box

Part 40 – Carving Open Vectors

Part 41 – The Fluting Toolpath

Part 42 – Resizing Multiple Objects

Part 43 – Combine Modes for 3D Models

Part 44 – Intro to Ramps and Leads

Part 45 – Combining Ramps and Leads

Part 46 – Create a Custom Clipart Library

Part 47 – Vector Placement and Sizing

Part 48 – Creating Template Files

Part 49 – Grouping Toolpaths and Saving G-Code

Part 50 – The Vector Texture Tool

If you’re looking for my V-Carving for the Absolute Beginner video series, click here.